Description:
Main Purpose: To Manage the staff of the drawing office and carry out 3D Administrative duties.
Key Performance Areas:
- Coordinating all drafting jobs within the Technical Services department.
- Creating P&IDS, general arrangements, isometrics and detailed drawings of boiler pressure parts, piping, ducting, steelwork and other boiler components in an efficient and clear manner.
- Training team members.
- Following and keeping up to date with technical trends and developments, including relevant software.
- Technical function:
- Assist other draftspersons with the interpretation and conversion of sketches and calculations. provided by the Engineers into clear drawings that comply with set drawing standards.
- Assist in checking of drawings compiled by other draftspersons according to the original sketches and calculations provided by the Engineer.
- Perform site measurements and creating or updating general arrangement and detail drawings accordingly.
- 3D Scanning, registration of point cloud, conversion into usable data.
- Administrative function:
- Manage staff administration requirements.
- Manage drawing office consumables and costs.
- Compile monthly reports for the Engineering Manager.
- Schedule, prioritise and allocate drawing request jobs according to the specific requirements of small and large projects.
- Ensure drawing work execution within budgets of hours and time frames.
- Control and report on hours booked on specific job tasks.
- 3D administration: -
- Setup and Management of 3D CAD systems currently in use;
- AutoCAD, Autodesk Inventor, CADWorx, Advanced Steel, Cyclone 360 (Model and Register), Cyclone 3DR, Zenith and Quick surface.
- Customisation of Standard Templates;
- Set up Rules for automated drawing extraction;
- Configuration of Clash detection software;
- Development of Catalogues for Piping; Equipment; Electrical components, structural etc.;
- Development of standard assemblies;
- Development of Procedures / Workflows (new procedures and updating current procedures);
- Setup and Management of 3D CAD systems currently in use;
- Ensure that all CAD/Engineering software is updated and current; obtain quoted for comparison and identify vendors for software support.
- Standardisation of Drawings Packages across the BPA group.
- Any other job related duties from time to time.
Competencies/Skills:
- Good verbal and written communication skills.
- Accurate costing and quoting for projects and ad-hoc work.
- Excellent time management.
- Workflow management.
- Planning and organisational skills.
- Problem solving and decision-making.
- High stress tolerance.
- Leadership and relationship building.
- Ability to work independently without close supervision and within specified time constraints, while following the Engineering Manager’s instructions.
- Own transport.
Preferred Requirements:
- Matric/N3.
- National Diploma in the Mechanical field and/or formal Draughting training.
- 10 Years’ experience of Draughting in the boiler field or similar heavy industries of which at least 3 years as a Supervisor.
- Proficient in the use of Auto Desk/CADworx/Advanced Steel Draughting packages.
- Proficiency in 3D scanning and associated software. Preferably Leica Products; Register 360, Cyclone Model, Cyclone 3DR, Zenith and Quick surface.
- Computer literate (MS Office).
Requirements:
- Coordinating all drafting jobs within the Technical Services department.
- Creating P&IDS, general arrangements, isometrics and detailed drawings of boiler pressure parts, piping, ducting, steelwork and other boiler components in an efficient and clear manner.
- Training team members.
- Following and keeping up to date with technical trends and developments, including relevant software.
- Technical function:
- Assist other draftspersons with the interpretation and conversion of sketches and calculations. provided by the Engineers into clear drawings that comply with set drawing standards.
- Assist in checking of drawings compiled by other draftspersons according to the original sketches and calculations provided by the Engineer.
- Perform site measurements and creating or updating general arrangement and detail drawings accordingly.
- 3D Scanning, registration of point cloud, conversion into usable data.
- Assist other draftspersons with the interpretation and conversion of sketches and calculations. provided by the Engineers into clear drawings that comply with set drawing standards.
- Assist in checking of drawings compiled by other draftspersons according to the original sketches and calculations provided by the Engineer.
- Perform site measurements and creating or updating general arrangement and detail drawings accordingly.
- 3D Scanning, registration of point cloud, conversion into usable data.
- Administrative function:
- Manage staff administration requirements.
- Manage drawing office consumables and costs.
- Compile monthly reports for the Engineering Manager.
- Schedule, prioritise and allocate drawing request jobs according to the specific requirements of small and large projects.
- Ensure drawing work execution within budgets of hours and time frames.
- Control and report on hours booked on specific job tasks.
- 3D administration: -
- Setup and Management of 3D CAD systems currently in use;
- AutoCAD, Autodesk Inventor, CADWorx, Advanced Steel, Cyclone 360 (Model and Register), Cyclone 3DR, Zenith and Quick surface.
- Customisation of Standard Templates;
- Set up Rules for automated drawing extraction;
- Configuration of Clash detection software;
- Development of Catalogues for Piping; Equipment; Electrical components, structural etc.;
- Development of standard assemblies;
- Development of Procedures / Workflows (new procedures and updating current procedures);
- Setup and Management of 3D CAD systems currently in use;
- Ensure that all CAD/Engineering software is updated and current; obtain quoted for comparison and identify vendors for software support.
- Standardisation of Drawings Packages across the BPA group.
- Any other job related duties from time to time.
- Manage staff administration requirements.
- Manage drawing office consumables and costs.
- Compile monthly reports for the Engineering Manager.
- Schedule, prioritise and allocate drawing request jobs according to the specific requirements of small and large projects.
- Ensure drawing work execution within budgets of hours and time frames.
- Control and report on hours booked on specific job tasks.
- 3D administration: -
- Setup and Management of 3D CAD systems currently in use;
- AutoCAD, Autodesk Inventor, CADWorx, Advanced Steel, Cyclone 360 (Model and Register), Cyclone 3DR, Zenith and Quick surface.
- Customisation of Standard Templates;
- Set up Rules for automated drawing extraction;
- Configuration of Clash detection software;
- Development of Catalogues for Piping; Equipment; Electrical components, structural etc.;
- Development of standard assemblies;
- Development of Procedures / Workflows (new procedures and updating current procedures);
- Setup and Management of 3D CAD systems currently in use;
- Ensure that all CAD/Engineering software is updated and current; obtain quoted for comparison and identify vendors for software support.
- Standardisation of Drawings Packages across the BPA group.
- Setup and Management of 3D CAD systems currently in use;
- AutoCAD, Autodesk Inventor, CADWorx, Advanced Steel, Cyclone 360 (Model and Register), Cyclone 3DR, Zenith and Quick surface.
- Customisation of Standard Templates;
- Set up Rules for automated drawing extraction;
- Configuration of Clash detection software;
- Development of Catalogues for Piping; Equipment; Electrical components, structural etc.;
- Development of standard assemblies;
- Development of Procedures / Workflows (new procedures and updating current procedures);
- AutoCAD, Autodesk Inventor, CADWorx, Advanced Steel, Cyclone 360 (Model and Register), Cyclone 3DR, Zenith and Quick surface.
- Good verbal and written communication skills.
- Accurate costing and quoting for projects and ad-hoc work.
- Excellent time management.
- Workflow management.
- Planning and organisational skills.
- Problem solving and decision-making.
- High stress tolerance.
- Leadership and relationship building.
- Ability to work independently without close supervision and within specified time constraints, while following the Engineering Manager’s instructions.
- Own transport.
- Matric/N3.
- National Diploma in the Mechanical field and/or formal Draughting training.
- 10 Years’ experience of Draughting in the boiler field or similar heavy industries of which at least 3 years as a Supervisor.
- Proficient in the use of Auto Desk/CADworx/Advanced Steel Draughting packages.
- Proficiency in 3D scanning and associated software. Preferably Leica Products; Register 360, Cyclone Model, Cyclone 3DR, Zenith and Quick surface.
- Computer literate (MS Office).
06 May 2024;
from:
careers24.com