Description:
Our client in the Engineering Sector is looking for a QC Inspector Level 2 who has at least 3 years of experience in the Oil and Gas, Petrochemical, or similar sectors. The successful candidate will be responsible for but not limited to the following:
· Welder performance is monitored to ensure compliance with all requirements and to ensure safety and quality.
· Under performance/non-performance is immediately addressed and where required, recorded, and reported to the relevant supervisor.
· Visual inspections or detailed inspections are performed as prescribed or required.
· Inspection before welding is conducted.
· Welding procedure sheets are up to date.
· Welder/s are qualified, and qualifications are verified.
· Calibration certificates, material certificates, consumer certificates are available and valid.
· Parent material identification is verified against documentation and markings. e. Welding consumables required are identified and available.
· Inspections are performed during welding to ensure that welding is following the drawings, weld procedures and application standards.
· Inspection is performed after welding to determine acceptability of appearance of welds as well as conformity with drawings and standards requirements.
· Repairs required are identified and correct repair procedure is identified and implemented and recorded as prescribed.
· Load/s loaded off or on trucks or moved from one area to another.
· All company policies and procedures and in particular quality and safety procedures are complied with.
· Signals from assisting employees are observed.
· Any reasonable instruction is carried out and assistance is provided where required.
· All inspection data is recorded as prescribed.
· All relevant reports and documents are collated and submitted to the Quality Manager for approval.
Requirements:
- Analytic
- Compliancy
Requirements
- NQF level 4 Engineering Qualification
- Must have strong Mechanical Background in Power Station Environment.
- Minimum 3 years of Experience in the Milling Plant Maintenance
- SAIW level 2 Welding Inspector Certificate
- SAIW level 1 Inspector or Supervisor qualification
- Professional SAIW Membership
- Valid driver's license
- NQF level 4 Engineering Qualification
- Must have strong Mechanical Background in Power Station Environment.
- Minimum 3 years of Experience in the Milling Plant Maintenance
- SAIW level 2 Welding Inspector Certificate
- SAIW level 1 Inspector or Supervisor qualification
- Professional SAIW Membership
- Valid driver's license
Requirements
- NQF level 4 Engineering Qualification
- Must have strong Mechanical Background in Power Station Environment.
- Minimum 3 years of Experience in the Milling Plant Maintenance
- SAIW level 2 Welding Inspector Certificate
- SAIW level 1 Inspector or Supervisor qualification
- Professional SAIW Membership
- Valid driver's license